Solar Street Light make full use of energy from the sun - mono solar panel with high efficiency, LED source, intelligent
controller, lithium battery are all in one.
It uses excellent practical control technology such as controller with micro radar sensor, human infrared induction/PIR sensor, etc.,
combined with a simple integrated structural design, perfect for achieving higher brightness and lower power consumption (average 15W power = 80W incandescent lighting ),
Long lifespan and free maintenance, strong waterproof and heat dissipation, and easy installation at the same time.
All advantages make it be our company's best patented product.
Part No. |
Solar Panel |
Lithium Battery |
Power |
LED |
CRI |
CCT. |
Luminous Flux |
Mounting |
Installation |
Product Standard |
IP |
Brand |
Height |
Distance |
LD-CH20 |
Monocrystalline silicon 18V 35W |
15AH DC12.8V |
20W |
Samsung
Bridgelux |
≥70 |
3000-6500K |
160LM/W |
4-5M |
15M |
1.Stand-by: Continuously
4-5 rainy days,
12 hours per night
2.Control modes: Light / Timing /
Mic sensor /
Timing + Microwave control |
IP65 |
LD-CH30 |
Monocrystalline silicon 18V 50W |
18AH DC12.8V |
30W |
160LM/W |
5-6M |
20M |
LD-CH40 |
Monocrystalline silicon 18V 50W |
21AH DC12.8V |
40W |
160LM/W |
5-6M |
20-25M |
LD-CH50 |
Monocrystalline silicon 18V 70W |
33AH DC12.8V |
50W |
160LM/W |
6-7M |
20-25M |
LD-CH60 |
Monocrystalline silicon 18V 70W |
36AH DC12.8V |
60W |
160LM/W |
7-8M |
20-25M |
LD-CH80 |
Monocrystalline silicon 18V 100W |
42AH DC12.8V |
80W |
160LM/W |
8-9M |
20-25M |
LD-CH100 |
Monocrystalline silicon 18V 110W |
48AH DC12.8V |
100W |
160LM/W |
9-10M |
30-35M |
Working time data is based on charging 8 hours in the sunny summer, measured in north
latitude 22°, east diameter 13°. Actual working time may be changed due to different
installation area, season, environment, direction etc.
⑴“All-in-one” will not work without sun. Please select the matched product model according to the Sunlight intensity of the install location or the total annual radiation of solar energy. In the lacking sunlight or long continuous rainy day area, the working time of solar lights can be shortened or can not light, All-in-one light with mains supply or solar dual-mode electric power supply is suggested to choose in such cases.
⑵All-in-one” selects long life span lithium battery as energy storage device. Discharge condition at night is at temperature - 20℃ ~ + 75℃, battery performance will be damaged beyond this range.
Please make sure the local extreme temperature does not exceed the above condition when selecting the “All-in-one”.
⑶“All-in-one” battery after fully charged, the longest store time can be up to six months. Check the battery in time after long time transport or storage, charge and record it on a regular time. Otherwise, the battery will be damaged.
⑷When installing “All-in-one”, make the solar panel towards the direction of the sun as possible in order to get maximum energy and avoid houses and the shadow of obstacles such as trees at the same time, otherwise it will reduce the generating effificiency of the solar panel, and lead to “All-in-one” working time being shortened.
⑸“All-in-one” solar panel surface's degree of cleanliness also affects the generating effificiency of the solar panel. So its surface (such as dust, leaves, greasy dirt, etc.) needs to be cleaned, scrubbing with ordinary cleaner on a regular time is suggested.
⑹“All-in-one” internal parts are with good waterproof design, all reach IP65 standard. Ventilation holes and cracks on the shell are specially designed for the cooling and drainage. Metal parts are all made of corrosion resistance aluminum or stainless steel, which can tolerate the strict environment of the sea or high heat and high humidity desert. Installation steps
(1) Select the best day-lighting location to set up the pole. Pole 3-5 meters height is appropriate, diameter 40 ~ 100mm, Thickness more than 2.0mm iron rod or steel rod.
(2) Open the package and check if components are completed Contained. Special tools M8 socket head cap screw
(3) Turn on the switch before installation. Switch 20W-40W Installation stepsLamp stand Screws
( 4) Put All In One solar light into the pole, fasten the screw